GoBright Power Control
GoBright Power Control Plugs are a new smart solution for managing power usage, and they are designed to work exclusively with the GoBright Interact hardware.
To ensure compatibility, the Interact must be running
firmware version 2.4.7 or above. Please ensure you update your Interact firmware before carrying out the following steps.
The Power Control Plugs support a rated voltage of 100V to 250V, with a maximum current of 16A. They operate within a temperature range of 0°C to 40°C.
They are compatible with AC frequencies between 50Hz and 60Hz.We've tested the UK adapter in November 2025.
To order this product from Ascentae, please quote the following product code: INT1-PC-UK. For non-UK versions, please speak to your account manager.
Overview
GoBright Power Control Plugs are built to offer you seamless integration with the GoBright Interact system.
- They support a Bluetooth range of approximately 15 meters.
- Up to five Power Control Plugs can be connected to a single Interact device.
- Designed exclusively for use with the Interact, these Power Control Plugs are available in UK, EU and USA versions.
Let's Get Going...
In this section we will guide you through the setup to get you up and running.
- Plug in your power adapter separately to the Interact. It'll show a solid blue colour on the left-hand side of the device. So you'll need a socket for the Interact power supply and a separate one for the power adapter.
- Press and hold the button on the device for 3-5 seconds until it starts to blink rapidly.
- On your Interact device, press and hold the time and select 'Open Device Info'.
- Select the bottom option for power:
- On this page, select 'Manage Smart Plugs'.
- Select 'New' in the bottom right-hand corner. The Interact will start to search for the device(s).
Please ensure your smart plug is still flashing blue at this point, so it's ready to pair. If it's a solid blue light, please press and hold the button again for 3-5 seconds, until it starts to blink rapidly again. 7. Select the device you would like to add to the Interact.
8. Confirm that you're happy with the setup!
9. Now we're setup and ready to go, remove the power supply for the Interact and transfer it over to the adapter.
PDF Fact Sheet
Click here